CONTENTS OF
The Playbook
1.
Meet ROMP Party
2.
Enjoy
Play Ideas
3.
Clean
4.
Charge
5.
Safety Instructions
6.
General Information
7.
1.
Meet ROMP  Party
2.
Enjoy
To get started, press and hold the power button for 3 secs until you see the LED light.

Remove the magnet and place the vibrator inside your panties. Place the magnetic cap on the outside of your underwear, ensuring a secure grip.
Slip your panties on so that the vibrator sits on your clit.

Use the remote (or hand it to a partner) to cycle through the 7 levels.

Press and hold the (+) button on the remote for 3 secs to place the panty vibrator into standby mode.

Remove your underwear, press and hold the panty vibrator‘s power button for 3 secs to turn off.  
3.
Play Ideas
ROMP Party is designed to be played with by a couple or solo, whether it’s a gentle tease or an earth-shaking climax... Need some inspiration? Here are some play ideas to help you get in the mood...

Use ROMP Party outdoors to have discreet fun with the remote control.
ROMP Party is hands free, so hand the control to your partner and let them control you, up to 5 meters away!
4.
Clean
ROMP Party is waterproof and submersible. You can clean it with warm water and toy cleaner or go and take a bath with it – whichever is more fun!
Your panty vibrator is waterproof (IPX7), so use it in the bath or shower for slippery fun, just make sure not to get the remote wet!
The remote control is not to be used in water.


5.
Charge
ROMP Party needs a powerup?

Place the magnetic charging cable (A) onto the charging pins (B) until they are secure. Connect the USB (C) to an electric source. After 80 mins, ROMP Party will be ready for you to enjoy again for up to 60 mins.

For the remote control, use the same charger as your panty vibe, and connect the same way! The remote control will give you up to 5 hours of use with only 60 minutes of charge time.
6.
Safety Instructions

WARNING

Sold as a novelty product only. Not suitable for medical purposes. Only use the product for the intended purpose. Keep out of reach of children. If you are under a physician’s care and/or have a condition requiring the use of any medical device, please consult your physician before using this product. Stop using the product immediately if you experience any skin irritations, pain or discomfort and consult your physician.

This product can be used by adults only. Persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge may only use the product if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children. Do not use on swollen or inflamed areas of skin. Remove piercings or jewellery in the genital area before use. Always clean the product before and after use according to the instructions given in the manual. To avoid damage to the product, the product and its battery must not be exposed to temperatures above 45°C, be dismantled or mechanically or electrically damaged. Sharing sex toys may transmit sexual diseases. Do not share your sex toys with users other than your partner. Use protective measures with your partner if necessary. Do not use the toy if you detect any cracks or signs of degradation in the cover material. This product is not designed for anal use. Do not use anally! To prevent stains, do not place the soft side of your product on an absorbent surface. To prevent stains, do not place the soft side of your product on an absorbent surface.

Magnetic fields can influence mechanical and electronic components such as pacemakers. Do not use the product directly over a pacemaker. Contact your physician for more information. Keep cards with magnetic stripes (such as credit cards) away from the product, as they may be damaged by the product’s magnet. If your product appears to be functioning abnormally, turn it off and consult the support section on our website.

CHARGING

Before the first use of the charging device, check the local voltage level, since the local mains voltage may not exceed the maximum mains voltage given on the charging device. The product must only be charged at an appropriate, extra-low voltage corresponding to the marking on the product: Panty Vibrator Remote contains rechargeable li-ion battery (3.7V, 50mAh). Do not use or clean the product while the battery is charging. Never immerse the charging device or charging cable in water or other fluids. This product contains batteries that are non-replaceable. This product contains a rechargeable Li-ion battery. Disconnect the charging cable from the electrical supply each time after the product has been charged.

FOR OPTIMAL USE OF THE PRODUCT, PLEASE FOLLOW THE FOLLOWING GUIDELINES

To guarantee a long battery life, please charge the product regularly, even if not in use. Store in a secure, dry place without exposure to direct sunlight. Store in a secure, dry place without exposure to direct sunlight.

NOTE ON BATTERIES

European regulations require that we provide the following information:  

Batteries and rechargeable batteries must not be disposed of in household waste. As an end user, you are legally required to return used batteries. Please use official collection facilities such as the collection points provided by public waste management authorities to do so. You can also return used batteries that we carry or have carried as new batteries to us. Please contact us at care@romp.toys. To prevent short circuits, the poles of lithium batteries should be taped before returning. For safety reasons, we ask you not to send the batteries to us by mail and refer you to the regulations for sending hazardous goods provided by mail carriers. If the batteries are permanently installed in the product, please do not try to remove them yourself. This may cause permanent damage to the device. Your obligations as a customer are otherwise regulated by the WEEE Directive and the national implementation law. Please observe the information in the manual and the safety instructions to prevent waste and littering. Used batteries contain harmful substances that can damage the environment or your health if they are not stored or disposed of properly. In particular, this applies to the improper handling of lithium batteries. Batteries also contain important raw materials such as iron, zinc, manganese and nickel and can be recycled. Separate collection allows these raw materials to be recycled and prevents negative impacts on the environment and human health from released pollutants. The sign with the crossed-out waste bin means that you must not dispose of batteries and accumulators with household waste.




Hg: Battery contains more than 0.0005 percent mercury by mass

Pb: Battery contains more than 0.004 percent lead by mass

Cd: Battery contains more than 0.002 percent cadmium by mass

NOTES ON THE DISPOSAL OF ELECTRICAL EQUIPMENT

European regulations require that we provide the following information: We would like to point out to owners of electrical equipment that old electrical equipment must be collected separately from municipal waste in accordance with applicable legal regulations. Batteries and accumulators that are not fir

mly encased in the old electrical equipment, as well as bulbs that can be removed from the equipment without being destroyed, must be separated from the old equipment in a non-destructive way before being given to a collection point for proper disposal. Please refer to the separate instructions for the disposal of batteries.

The symbol of a crossed-out waste bin shown below and affixed to old electrical equipment also indicates that the equipment must be collected separately:

According to the WEEE Directive and the national implementation law, as distributors of electrical equipment, we are required to take back certain waste electrical equipment free of charge. When you purchase a new electrical and electronic device, you can surrender an old electrical device that essentially performs the same functions as the new device to us free of charge. If your old electrical equipment is not larger than 25 centimeters in any dimension, you can also surrender it to us free of charge without purchasing a new device. Please contact us at care@romp.toys. We will then arrange the return of the old electrical equipment. For safety reasons, we would like to ask you to refrain from shipping lighting equipment (such as bulbs). Please use the collection points provided by public waste management authorities to return lighting equipment or contact us directly at the aforementioned e-mail address. When you purchase a new electrical and electronic device, you can surrender an old electrical device that essentially performs the same functions as the new device to us free of charge. If your old electrical equipment is not larger than 25 centimeters in any dimension, you can also surrender it to us free of charge without purchasing a new device. Please contact us at care@romp.toys. We will then arrange the return of the old electrical equipment. For safety reasons, we would like to ask you to refrain from shipping lighting equipment (such as bulbs). Please use the collection points provided by public waste management authorities to return lighting equipment or contact us directly at the aforementioned e-mail address. As the end user, you are responsible for deleting personal data from the used electrical equipment before handing it in for disposal.

Please observe the information in the manual and safety instructions to prevent waste, and please check for possible repair options.

7.
General Information
CUSTOMER CARE

Model: Party

Model No.: PAR3C

Electrical Rating: 
Party Vibe: 
When operated by battery: 3.7 V = 0.28 A
Power input when charging: 5 V  0.22 A : Built-in li-ion rechargeable battery.

Remote:
When operated by battery: 3.7V  0.008 A
Power input when charging: 5 V  0.07 A when charged using USB Charging device.
Use USB AC adapter (not included) with power output corresponding to product rating. Use original provided cable only.

Contains  

FCC ID: ZUERPAR2A
IC: 9804A-RPAR2A
Model: Device: PAR3C
Remote: R-PAR2A
HVIN: R-PAR2A
PMN: Remote for panty vibrator

FCC SDoC (ROMP Party, Device: PAR3C Remote: R-PAR2A):

Responsible party - U.S. Contact Information:
WOW Tech USA Ltd.  
103 Foulk Rd, Ste. 202  
Wilmington, DE, USA
19803-3742  
Attention: President

FCC and IC statements

This device complies with Part 15 of the FCC Rules and Industry Canada license exempt RSS

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil est conforme à la partie 15 des Règles FCC et aux normes RSS exemptes de licence d’Industry Canada. L’utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles qui pourraient provoquer un fonctionnement non souhaité.  

Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device must not be co-located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.

Le présent appareil est conforme de ce matériel aux conformités ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité d’acquérir les informations correspondante.

MANUFACTURER WARRANTY

WOW Tech Europe GmbH offers a voluntary manufacturer warranty for this product which applies in addition to the statutory warranty to which consumers are entitled to towards their seller. Details about the manufacturer warranty can be found on the website www.romp.toys

For EU only
• Operations Frequency (MHz): 443.920 MHz
• Max. RF output p r(dBM) Remote: 1.98dBm

WOW Tech Europe GmbH hereby declares that the radio equipment type [Non-Specific Short Range Device] is compliant with Directive 2014/53/EU. WOW Tech Europe GmbH declares that the product is also compliant with Directive 2011/65/EC (RoHS). The full text of the EU declaration of conformity is available at the following internet address: https://www. romp.toys/eu/declaration-of-conformity.


Date of issue 03/2024
Partnumber: MA-00349

Back to top arrow.